Category: In the Home

Roofing Insulation 101

Not all roofing materials that are available to the masses today have superior insulating properties. Some, in fact, are excellent heat conductors, making heat transfer from the indoors to the outdoors far too easy. Of course, that means less energy efficiency and higher heating and cooling bills. As a result, there is an obvious need for something else to stop that flow of heat. This is where an under layer, which defends against heat transfer at the roof, comes in handy. For information on the best insulation material for you and what it will cost for installation, call a local contractors for free roof repair estimate.

Insulation on the roof can drastically increase a home’s efficiency, thereby having a big impact on heating and cooling costs throughout the year. There are several different types of roofing insulation available and each comes with a distinct list of pros and cons. Relatively speaking, the upfront cost is minimal compared to the cost savings over the insulation’s lifetime. -n the past fiberglass insulation batting was the material used for this purpose. However, there have been many health concerns tied to its use, particularly because of it containing formaldehyde. This chemical is a well known carcinogen, which makes the batting very harmful to those who come in close contact to it, particularly if it is inhaled. As a result, industry experts have developed an array of other insulation options.

The first alternative is recycled cellulose fiber, which is made from paper products, such as recycled newspaper. This insulation carries a higher R-value than fiberglass batting, which is to say that the measure of thermal resistance or the measure of heat transfer over the area of the insulating material is less than that of fiberglass batting. There are many factors that can affect R-value, such as thickness of the material and the way in which it is installed, but when installed per manufacturers guidelines, cellulose wins out. However, there are a couple of disadvantages. Recycled cellulose is a blown-in insulation and not appropriate in all homes. It also costs more to buy and install. It also requires a treatment of boric acid in order to be considered fire resistant. Boric acid is not harmful and is used in many other applications, such as antiseptics and insecticides.

On the other hand, recycled cellulose has many other advantages as a roofing insulation. It is an excellent pest repellent and offers natural sound proofing.

Recycled denim is another, newer form of insulation. Unlike cellulose, it is available in large, easy to install rolls, rather than having to be blown in. This type of insulation is exceptional at holding heat and it also provides sound absorption. The downside, again, is that it must be treated with boric acid to repel bugs, rodents, and fire.

Soy insulation is becoming increasingly popular for its hardiness and for the fact that is is directly derived from nature. It is manufactured from soy bean oil and must be sprayed into the underside of the roof. It expands upon contact to fill cracks, crevices and other imperfections, and then it hardens there. Soy insulation is naturally flame resistant and boasts a very long lifespan; it will continue to work as long as the home stands.

Sheep’s wool also works well as insulation and is another nature-made product. It is, in fact, arguably the best insulator. However, it also carries the highest price tag which is why it is not often requested for roof repair in Irving, TX. That being said, however, sheep’s wool is naturally fire retardant and it also repels moisture, which means it won’t be harmed in the time that it takes to hire a professional for roof leak repair. The wool won’t irritate the lungs of those installing it like some of the other varieties of insulation and is highly eco-friendly, as it requires very little energy to produce, boasts a long life, and is fully recyclable.

Affordable Dallas Roofing Solutions
3102 Maple Ave #400-A1
Dallas, Texas 75201
(972) 916-9600

Basic Roofing Tools You Need Now

Good roof repair demands the right set of tools on hand, and if you’re not exactly sure what you’re going to need, it’s best not to go wandering through the hardware store with a guess and a prayer. Instead, understanding exactly what you need before you ever dig the ladder out of the garage can not only save you a bit of time and another trip to the store, but it could also save your roof, too. After all, the right tool for the right job means better results every single time.

A good roof repair job begins with a few basic tools. First, make certain you have a ladder that will get you up there. It should be sturdy enough to hold your weight, so make sure it’s not shaky when you climb on it. In most cases, you’ll probably want to avoid wooden ladders, as they tend to be less sturdy than fiberglass models are. Aluminum ladders come in a close second. Make certain you inspect your ladder for defects before you start climbing on it. If it’s held together with screws, make sure they’re tight, too. If you don’t seem to have a ladder that will work for you, invest in one or borrow one from a friend or family member.

In addition to a good ladder, you should also invest in a good utility knife, a tape measure, a hammer, and a chalk line, as well as any materials you actually need for the job. Your utility knife is what you’ll use to cut your shingles and other roofing material. There are some specialized roofing utility knives. They have knobs that turn to open them, which can eliminate the need to use a screwdriver to open it and close it. You should still be able to find this type of utility knife at your local hardware store. The tape measure, hammer, and chalk line you’ll need are all fairly standard equipment.

Once you have the basic tools on hand for roof repair you may need to know a bit more about using them before you get started. First, remember that you should hold your roofing nails with your palm up to get it started. While you usually use your thumb and forefinger to hold a nail, in this case, it can help keep you from serious injury if you hit your hand while you’re on the roof. Additionally, it’s important to note that a plastic cap nail has the sheathing around it to help hold the felt a bit better. The surface of these nails is far broader than traditional nails, and thanks to a measure of flexibility in the sheath, you can be sure the wind won’t pull at the felt. This is where one other helpful tool can come into place. You can get a pneumatic nail gun to drive the nail and its cap into the roof fairly quickly, which is great if it’s just you working on the project.

Affordable Houston Roofing Solutions
5100 Westheimer # 200-A1
Houston, Texas 77056
Phone: (832) 730-2500

New Windows: Should You Choose Wood or Vinyl?

There are a number of things to consider when getting new windows, such as size, shape, style, manufacturer and even the contractor who you will hire to install them. However, one of the decisions that seem to take a backseat in the minds of homeowners, until they are finally ready to buy, is what material the windows will be made of. While many homeowners today are opting for vinyl, there are still many that prefer the classic look and feel of wood. As you consider the windows that you will place in your home, consider these pros and cons of the two varieties.

Vinyl This manufactured material is highly effective for insulation purposes. It can hold heat in during the cooler winter months and keep it out when the hot summer sun rises. Vinyl replacement windows come with dual weather stripping, which creates an extra tight seal and helps to eliminate drafts that negatively impact the energy efficiency of your home.

Furthermore, they are resistant against the harmful rays of the sun, which means added protection against fading of curtains, rugs and other materials just inside the window.

This variety of window requires very little maintenance and is very easy to clean because it is smooth and non-porous. There is no need to scrape and paint, as one would have to do with wood frames. Furthermore, they don’t have as much response to moisture, which reduces the chances of rot and mold formation; there is less shrinking and swelling as a result.

Perhaps the biggest selling point of vinyl windows is the cost. Window contractors highly recommend them, yet they are generally less expensive than the wooden variety. At a reasonable price, they also come with fantastic warranties.

Wood It would seem, given what was written above, that no one would want to choose wood. Vinyl does have a lot to offer, but there are also reasons why wood windows are still manufactured today.

Wood also provides natural insulation against the outdoor elements. Outfitted with superior weather stripping, it does a fantastic job as reducing drafts and maintaining a pleasant temperature within the home. Wood window frames also help to absorb sound, which keeps road noise out. They are, however, going to require maintenance. That being said, many people enjoy the fact that wooden frames allow them to change their look regularly. They can be painted or stained to match the décor of the room, so they blend in, rather than standing out. Furthermore, individuals in the business of restoring older homes, love the fact that they give an authentic look and feel, where vinyl feels cold and out of place.

Unfortunately, wood frames remain the more expensive option, which is why many window installation contractors handle fewer of them than the other variety. Wooden frames require the use of natural resources. Thus, they are entirely unique and original each and every time. There is a high demand for that natural look today and these frames are not churned out at the same rate as their vinyl counterparts. As a result there is an issue of supply and demanding pushing the price upward. Given that, wooden woods can actually increase the value of your home to a greater degree than vinyl.